riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com 09/13 type CAR0402 car0603 car0805 car1206 car2010 car2512 power rating (w) at 70c 0.0625 0.0625 0.1 0.125 0.25 0.5 high power rating (w) at 70c ( add hp to part number ) - 0.1 0.125 0.25 0.33 0.75 standard resistance range (w) low tcr resistance range (w) 50 to 205k 50 to 70k 1 to 1m 5 - 332k 1 to 2m 5 to 511k 1 to 2.5m 5 to 1m 1 to 3m 5 to 1m operating temperature -55 - +155c max operating voltage 1 25v 50v 100v 150v max overload voltage 2 50v 100v 200v 300v tolerances (depending on ohmic value) 0.01% / 0.05% / 0.1% / 0.25% / 0.5% / 1% temperature coeffcient (depending on ohmic value) 5 to 50 dimensions (lxwxt) mm [inches] 1.00 x 0.50 x 0.3 [0.04 x 0.02 x 0.012] 1.55 x 0.80 x 0.45 [0.06 x 0.03 x 0.018] 2.00 x 1.25 x 0.55 [0.08 x 0.05 x 0.022] 3.05 x 1.55 x 0.55 [0.12 x 0.06 x 0.022] 5.00 x 2.50 x 0.55 [0.20 x 0.10 x 0.022] 6.30 x 3.10 x 0.55 [0.25 x 0.12 x 0.022] packaging (pcs) tape and reel 10,000 5,000 4,000 car series ? resistances from 1 ohm to 3m ohms ? power rating 0.06 to 0.75 watt ? resistance tolerances to 0.01% ? tcrs to 5 ppm/c ? sizes: 0402 /0603 / 0805 / 1206 / 2010 / 2512 specifications thin film precision chip resistor ordering information part description: part type - resistance - tolerance - tcr - hp option - packaging example: car 0402 50ohms 0.05% 25ppm (note: if no tcr is specifed: the highest value will be supplied) 1 operating voltage = or max listed, whichever is lower. 2 overload voltage = 2.5 * or max listed, whichever is lower. ( p * r ) ( p * r )
riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com 09/13 environmental characteristics test requirement conditions tol. < 0.05% tol. >0.05% tcr as spec. +25/-55/+25/+125/+25c short time overload r0.05% r0.2% rcwv*2.5 or max. overload voltage for 5 seconds r0.2% for high power rating insulation resistance >1000 m apply 100vdc for 1 minute load life r0.05% r0.2% 702c, max. working voltage for 1000 hrs with 1.5 hrs on and 0.5 hrs off >7k r0.5% r0.5% for high power rating damp heat with load r0.05% r0.3% 402c, 90~95% r.h. max. working voltage for 1000 hrs with 1.5 hrs on and 0.5 hrs off r0.5% for high power rating bending strength r0.05% r0.2% bending amplitude 3 mm for 10 seconds solderability 95% min. coverage 2455c for 3 seconds resistance to soldering heat r0.05% r0.2% 2605c for 10 seconds thermal shock r0.05% r0.25% -55c~150c, 100 cycles low temperature operation r0.05% r0.2% 1 hour, -65c, followed by 45 minutes of rcwv r0.5% for high power rating pow er derating curve 0 20 40 60 80 100 0 20 40 60 70 80 100 120 140 155 ambient temperature (c) power (%) car series thin film precision chip resistor
|